Peterborough

Peterborough: A 2,570m2 Horizontal sub-surface flow reed bed treating hydrocarbon loaded run-ff with peak flows of 1,420 m3/day.

Additional Info

  • In operation since: 2003
  • Type of wastewater treated: Other
  • Type of wastewater (other): Warehouse Run Off
  • Hydraulic load: 1,420 m³/day
  • Organic load (PE): N/A
  • Organic design load (kg BOD/day): 3-5 Kg/d hydrocarbon based
  • Location: Peterborugh ,Cambridgeshire, UK
  • Client: IKEA
  • Stage 1 type: Horizontal sub-surface flow
  • Stage 1 surface area (m²): 2,570
  • Cost: £178,000.00
  • Needs:

    The IKEA warehouse in Peterborough operates as a distribution centre to the company retail outlets in the local region. The warehouse itself is a significant size and, combined with the hard standing required for the parking and turning of large articulated lorries, generates a significant rainfall catchment. The consequent run off from the warehouse generated during rainfall events requires management and treatment prior to discharge back into the environment. The event based nature of the flow, following precipitation events, meant that some form of balancing was required to handle initial high ‘first flush’ volumes. Run off passing over the hard standing areas picked up hydrocarbons from oil and rubber deposits from the lorries as well as grits. These would be present in higher concentrations within the ‘first flush’ and needed to be removed to acceptable levels prior to discharge. The Environment Agency specified a visual consent with a maximum discharge rate of 16.4 l/sec.

  • Solution:

    A suitable area was identified between the warehouse and a drainage ditch leading to a network of local amenity ponds. A spillway was constructed leading to an attenuation lagoon to provide some dynamic storage and to settle suspended solids and grit. One boundary of this lagoon was constructed using gabions which allowed the run off to flow quiescently from the lagoon into a horizontal subsurface flow reed bed constructed on the other side of the gabions. This provides treatment including solids and hydrocarbon reduction before the run-off is discharged into a surface water course. The total area of the system is 2,570m2.

  • Benefits:

    The attenuation lagoon and horizontal sub-surface flow reed bed provide IKEA with a simple and robust, low carbon footprint run-off management and treatment system with low operational costs. The lagoon and reed bed blend in naturally with the amenity ponds nearby adding to the parkland nature of the local semi-urban environment and compensating for the impact of the warehouse.

Read 2737 times
More in this category: « Bobbingworth Aldbrough »